Home > Knowledge > Content
The characteristics of ceramic hob
- Dec 22, 2017 -

1, wear resistance is good, it can process hard and hard materials that traditional tools are difficult to process or cannot be processed at all. Therefore, it can avoid the power consumed by annealing process, and therefore, it can also improve the hardness of workpiece and extend the service life of machine equipment.

2. Not only can the high hardness material be rough and finish machining, but also can be processed by milling, planing, intermittent cutting, rough cutting and rough cutting.

3. The cutting of the ceramic blade is less than the metal friction, and the cutting is not easy to stick on the blade. It is not easy to produce the chip tumor. And the high speed cutting can be used. So when the conditions are the same, the work table and the roughness are low.

4, the tool durability is several times or even several times higher than that of the traditional tool, reducing the number of cutting tools in the processing, and ensuring the small taper and high precision of the workpiece to be processed.

5, high temperature resistance, red hard. It can be cut at 1200 degrees centigrade, so the cutting speed of the ceramic tool can be much higher than that of the hard alloy. It can carry out high speed cutting or achieve "vehicle and milling instead of grinding". The cutting efficiency is 3-10 times higher than that of traditional cutting tools, so as to save labor hours, power and machine tools 30-70% or higher.

6, the main raw material of silicon nitride ceramic tool is natural nitrogen and silicon. Instead of cemented carbide, it can save a lot of important metals such as W, Co, Ta and Nb.