Home > Knowledge > Content
How to identify the quality of stainless steel sink?
- Dec 22, 2017 -

1., the material of the flume: the sink is also known as the kitchen basin, and the material should be labeled with 304 stainless steel, because the carbon content of 304 steel is low, so the steel has better flexibility and the thickness of the sink is generally 1.0mm.

2., the production way of the water tank: there are mainly two ways to produce the flume, one is to use water to press it one time, and another is to weld, and the bottom is welded, middle to butt welding and wheel welding.

A punched tank is preferred, the tightness is good, but the water depth of welding is not deep, usually less than 18mm deep and the bottom of the deep welding can reach 21mm, so choose a deep sink, attention must be paid to the welding sealing degree.

The bottom of the 3. tank has an unprotected coating: the bottom of the tank is added to a protective coating for sound and condensate. The better coating is to use the mortar to spray the back of the tank on the whole. The ordinary one is attached to the bottom with a rubber gasket, and it can also play a quiet sound effect.

4., the size of the flume: there is nothing to be noticed about the length, but the width is very important. The width should be the width of the cabinet. The width of the standard table is 55CM and 60CM two, but everything is special. The 50CM of the old house is mostly. The width of the selected flume should be within 45CM of the 55CM. The width of the flume selected by the 60CM's table can be installed as long as no more than 50CM. However, the width of the water tank selected by 50CM is narrow and the width can not exceed 41CM, which is very important.

Installation of 5. water tank: two, Taiwan and Taiwan type type, so there is a sink on the stage of the basin and the basin two basin, are generally made of a type, but in recent years under counter wind quietly blowing, under table type more beautiful, give a person a a refreshing feeling, and easy to play table.

6., the way of surface treatment of the flume: after the surface treatment, the ability of oil stain prevention is greatly enhanced. The common surface is the frosted surface, the Pearl Silver face and the vortex surface have their own characteristics.

7. water trough of the water parts: the water pipe water pipe to select the PVC pipe to be good

In addition, water price difference, in addition to material factors and brand, a lot of high-grade water is because it has a lot of human functional design and configuration, such as Taiwan (not wet hand control, water draining board, sliding board), make the kitchen life more convenient and more easily.

So it is still more in the market to see, to understand, and then according to the real situation in your own kitchen choice!