Home > Knowledge > Content
Gas stove need to be on the battery?
- Dec 22, 2017 -

Because many consumers using traditional gas stoves do not know the first time to use embedded batteries to install, the stove is installed, then get angry after the ignition can not, because the product is also problematic, the stove moved to the point of sale for return.

Table stove ignition ignition principle and the same, is the use of piezoelectric ceramic ignition. This ignition is the use of twisting knob to create impact generated high voltage. The disadvantage of this ignition is the need to twist the twist twist, life is also shorter. Basically only cheaper desktop cookers use this ignition method. Therefore, desktop cooker generally do not need batteries, the use of human twisting to generate electricity.

Gas stove ignition pulse function is 1.5V DC into about 1500V high voltage intermittent continuous discharge. This voltage can be in the stove ignition pin and the center of the fire cap emit high temperature electric arc to ignite the gas. Now commonly used in this type of ignition stove embedded.


So how to distinguish between the stove need to be on the battery? It can be seen from the above working principle, the stove has ignition pin positive electronic pulse ignition, it is necessary on the battery. That stove does not need to fire the needle on the battery.

At present, benchtop cookers must be equipped with quenching devices according to the national requirements, and the thermocouple extinguishes the warranty because of the structure more stable, long service life and favored by consumers. Aerospace Kitchen reminds you that the look of similar products, the details may not be the difference, but in the use of experience there is a huge difference. If we are in the market inspection found that many non-smoking stove cooking difficulties, is the ignition of the stove and fire cover the distance between the ignition pin and the fire cover the location of the vents do not match.